Programming instructions

OPERATION & CALIBRATION
1-39
8. Press the PRODUCT KEY (16) to silence the
alarm. Remove the product.
Using PreAlarms:
1. The top display reads AX__.
NOTE: A indicates the alarm function. X is the
prealarm number. __ is the alarm time.
The LED for the active product key flashes. All other
LEDS are off. The function keys are disabled.
2. If a manual PreAlarm is activated, press the prodĆ
uct key to silence the alarm.
If an automatic PreAlarm is activated the alarm
sounds for approximately 5 seconds then stops
automatically. Press the product key to silence
automatic PreAlarms.
Using Head Count:
Use the following instructions to display the current
head count for an individual product key.
1. Press the SCAN KEY (14) and the desired prodĆ
uct key simultaneously. The top display reads
HDXX.
NOTE: HD indicates the head count function. XX
indicates product 1 to 16.
The bottom display gives the total number of
heads cooked from 1 to 9999. The product key
LED remains lit.
2. Press the TOGGLE/CLEAR KEY (10) to reset the
counter if desired.
3. Press the SCAN KEY (14) to exit.
Use the following instructions to display the total
head count.
1. Press the SCAN KEY (14) and the ENTER KEY
(13) simultaneously. The top display reads
HEAd. The bottom display gives the total number
of heads cooked from 1 to 9999. All product
LEDS remain lit
2. Press the TOGGLE/CLEAR KEY (10) to reset the
counter if desired.
NOTE: Clearing the total head count also clears
individual product head counts.
3. Press the SCAN KEY (14) to exit.