Programming instructions

CONVECTION OVEN CONTROLS
1-38
OVEN OPERATION
Oven Startup:
1. Toggle the POWER SWITCH (1) to ON. The oven
preheats to the lowest programmed first stage
temperature. The LEDS (15) for all products with
the same first stage temperature light.
While the unit preheats the TOP DISPLAY (2)
gives the actual temperature. The BOTTOM DISĆ
PLAY (5) reads Lo if the oven is more than 10_ beĆ
low setpoint. When the oven reaches 10_ of
the preheat temperature an alarm sounds and
the bottom display reads LoAd.
Single Product Cooking Procedure:
NOTE: If the led next to the desired product key is lit
skip step 1.
1. Press the desired PRODUCT KEY (16). The oven
preheats to the first stage temperature for the seĆ
lected product. When the oven reaches 10_ of
the preheat temperature an alarm sounds and the
bottom display reads LoAd.
2. Load the product into the oven. Press the seĆ
lected PRODUCT KEY (16) to start the cook
cycle. The LED (15) next to the selected product
key flashes. The top display reads ----. The
bottom display counts down the cook time in
minutes:seconds.
NOTE: If the selected product has a cook time
of greater than 59:59 the top display
reads Hr-- for the total number of
hours. The bottom display counts down
the cook time in minutes:seconds.
NOTE: If the selected product is a single stage
recipe the LEDS for all single stage prodĆ
ucts with the same cook temperature and
fan speed will light. If the selected prodĆ
uct is a multiple stage recipe no other
product LEDS will light.
NOTE: Press and hold the selected product key
for three seconds to cancel the cook
cycle.
3. When the cook time expires an alarm sounds
and the top display reads donE.
4. Press the selected product key to silence the
alarm. Remove the product.
Multiple Batch Cooking Procedure:
This procedure is for single stage recipes with the
same cook temperature and fan speed only.
NOTE: If the led next to the first desired product key
is lit skip step 1.
1. Press the first desired PRODUCT KEY (16). The
LEDS for all recipes with the same cook temperaĆ
ture and fan speed will light.
The oven preheats to the cook temperature for
the selected product. When the oven reaches
10_ of the preheat temperature an alarm
sounds and the bottom display reads LoAd.
2. Load the first product into the oven. Press the seĆ
lected PRODUCT KEY (16) to start the cook
cycle. The LED (15) next to the selected product
key flashes. The top display reads ----. The
bottom display counts down the cook time in
minutes:seconds.
3. Load the second product. Press the appropriate
PRODUCT KEY (16).
NOTE: Only products with lighted LEDS may be
selected.
4. The led for the product with the least time reĆ
maining flashes faster than the led for the other
product. The TOP DISPLAY (2) reads ----.
The BOTTOM DISPLAY (5) counts down the
cook time for the product with the least time reĆ
maining.
NOTE: To view the remaining cook time for the
other product press and hold the SCAN
KEY (14). The bottom display cycles
through the remaining cook times for
each product. Only the led for the prodĆ
uct with the cook time displayed will be
lit.
5. When a cook time expires an alarm sounds. The
top display reads donE. The led for the finished
product lights. All other LEDS are dark.
6. Press the PRODUCT KEY (16) for the finished
product to silence the alarm. Remove the prodĆ
uct. Close the oven door. The TOP DISPLAY (2)
reads ----. The BOTTOM DISPLAY (5)
counts down the cook time for the other product.
7. When the cook time expires an alarm sounds
and the top display reads donE.