Programming instructions

OPERATION & CALIBRATION
1-13
PULSE PLUS
ON
OFF
OVEN OFF
COOL
DOWN
COOK
LIGHTS
FAN DELAY TIMER
TIMER
SOLID STATE
THERMOSTAT
HI
LO
BLOWER
1
3
2
LIGHT OFF
OVEN READY
4
5
6
8
7
9
60Hz
Only
FIGURE 4
CONTROL DESCRIPTION
1. SELECTOR SWITCH - controls power to the
oven for cook or cool down.
2. BLOWER SWITCH - controls blower speed, eiĆ
ther hi or lo. Two speed not available in 50 Hz.
3. LIGHTS SWITCH - controls interior lights.
4. AMBER FAN DELAY LIGHT - indicates the oven
is in pulse plus.
5. FAN DELAY TIMER - activates pulse plus for
0Ć10 minutes. The blower and burners pulse on
for 30 seconds and off for 30 seconds for the
duration of time set.
6. RED INDICATOR LIGHT - indicates oven is in
the cook timer cycle.
7. COOK TIMER - activates an electric buzzer that
sounds when the cook time expires.
8. OVEN READY LIGHT - when lit indicates burner
operation. When the light goes out, the oven has
reached operating temperature.
9. SOLID STATE THERMOSTAT - allows either 8
preĆset temperatures to be selected in accorĆ
dance with customer requirements, or an infinite
selection of temperatures from 0Ć500_F
(0Ć260_C). (infinite control shown)
OPERATION
1. Turn the SELECTOR Switch (1) to COOK.
2. Set the SOLID STATE THERMOSTAT (9) to the
desired cook temperature.
3. Preheat the oven until the OVEN READY LIGHT
(8) goes out.
4. Load product into the oven.
5. Set FAN DELAY TIMER (5) for the desired time for
pulse plus operation.
6. Set the COOK TIMER (7) for the desired cook
time.
7. When the buzzer sounds, remove product from
the oven. Turn the TIMER (7) knob to OFF to siĆ
lence the buzzer.
8. Turn the SELECTOR SWITCH (1) to OVEN OFF.
WARNING!!
A complete five minute shutdown must be
observed before the oven is relighted.