Programming instructions

CONVEYOR OVEN CONTROLS
2-12
MENU PROGRAMMING
NOTE: The following example is in _F. The display
will read _C if programmed in celsius.
To enter programming mode:
1. With the oven off, press and hold the UP ARROW
key (3) and the ENTER/RESET key (5) simultaĆ
neously for approximately three seconds.
The display reads:
ACCESS CODE
000
2. Press and hold the UP ARROW key (3) until the
bottom line of the display reads 111 (the store acĆ
cess code).
3. Press the ENTER/RESET key (5) to enter the proĆ
gramming mode.
To program the menu keys:
1. The display reads:
SELECT MENU KEY
MENU 1, 2, 3, OR 4
2. Press the MENU key (4) to be programmed.
NOTE: For this example we will program menu
key 1.
3. The display reads:
MENUĆ1 SELECT TEMP
XXXF PRESS ENTER
Use the ARROW keys (3) to scroll to the desired
cook temperature. Press the ENTER key (5) to
store the new cook temperature.
4. The display reads:
MENUĆ1 COOK TIME
XX:XX PRESS ENTER
Use the ARROW keys (3) to scroll to the desired
cook time. Press the ENTER key (5) to store the
new cook time.
5. The display flashes:
MENUĆ1
PROGRAM DONE
To exit the programming mode:
1. Press and hold the UP ARROW key (3) and the
ENTER/RESET key (5) simultaneously for
approximately three seconds.
NOTE: If no key is pressed for 60 seconds, the
control automatically exits the program
mode.
OPERATION
1. Press the OVEN ON/OFF key (2). The control deĆ
faults to the last time and temperature settings
used.
The display reads:
MĆX TEMP XXXF HEAT
COOK TIME XX:XX
NOTE: HEAT appears in the top line of the display
whenever the control calls for heat.
2. Press the desired MENU key (4).
3. The fans begin to run. The conveyor belt begins
to travel at the set cook time. The heat rises to the
setpoint temperature.
4. When the oven reaches the set temperature,
READY and SET are displayed. The heat rises to
the setpoint temperature. TEMP flash alternately
in the top line of the display and an audible alarm
sounds.
NOTE: To change the cook time and temperaĆ
ture press any of the other menu keys.
To display the actual oven temperature:
1. Press both ARROW keys (4) .
The display reads:
XXXF
DOWN - EXIT
2. Press the down arrow key to return the display to
the setpoint time and temperature.
To turn the oven off:
1. Press the OVEN ON/OFF key (2). The oven is
equipped with a coolĆdown feature for motor
shaft and bearing protection. This enables the
blower motor(s) to run regardless of the controlĆ
ler status. The blower(s) continue to run until the
oven cools to a safe temperature.