Corp. ELECTRIC COMPACT DECK OVENS INSTALLATION -- OPERATION -- MAINTENANCE 1400 SERIES

Installation
6
Oven Assembly
Before assembly and installation of the oven,
check that all components have been received. In
addition to the oven, legs, decks and/or other ac-
cessories may be required.
Single Sections
D 4” (10 cm) legs are shipped inside the oven,
packed in a separate carton.
D The decks are individually packaged and se-
cured to the oven back.
Double Sections
D 4” (10 cm) legs are packed in lower sections.
D Spacer is shipped attached to the upper sec-
tion.
D Securing plate to attach units together is lo-
cated in t he upper section.
D The decks are packaged with each section.
LEG A TT ACHMENT
1. Tip bottom oven section backward.
2. Attach each of the four legs into the nuts se-
cured in t he oven bottom.
3. Tighten each leg and a dj ust the leg feet to
approximately the same height.
NOTE: F inal leg fet adjustment will be re-
quired during the leveling operation.
Figure 3