User manual
Page 10
SwitchBlade™ X3 Manual Rev. A © 2014 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The LED Control Panel
All the goodies and different modes possible with the SwitchBlade™ X3
LED are accessed by using the control panel on the front of the xture.
There are 4 control buttons below the LED display which allow you to
navigate through the various control panel menus.
<MENU>
Is used to navigate to the previous higher-level menu item.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
<ENTER>
Is used to select and conrm/store the current selection.
The Control Panel LED Display shows the menu items you select from the menu
map on page #11. When a menu function is selected, the display will show
immediately the rst available option for the selected menu function. To select
a menu item, press <ENTER>.
Press the <MENU> button repeatedly until you reach the desired menu
function. Use the <UP/DOWN> buttons to navigate the menu options. Press
the <ENTER> button to select the menu function currently displayed, or
to enable a menu option. To return to the previous option or menu without
changing the value, press the <MENU> button.