User manual

Page 14
RokBox™ EXA Manual Rev. A © 2013 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.)ThedefaultmodeforthextureisDMX,whichappearsas
d001 on the LED Readout. To
select a different DMX address, using the <MENU> button, select
Addr,then hit <ENTER>.
Use the <UP/DOWN> buttons to select the correct address, then hit <ENTER> toconrm.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, press the <MENU> button, then use the <UP> or
<DOWN> buttons until the display reads
Chnd and press the <MENU> button. Then use
the <UP> or <DOWN> buttons until the display reaches your desired channel mode. Press the
<MENU>buttontoconrm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
1.)TosetthextureinFlash/Fademode,select
FLAS or FAdE.Toconrm,pressthe
<ENTER> button.
2.)Now,youcanadjusttheashsettingsfrom
FL00-FL15 or the fade settings from
FA00-FA15. Then press the <ENTER>buttontoconrm.
3.)Tousethextureinautomaticmode,select
ASC-, and press the <ENTER> button. Then
use the <UP/DOWN> to choose from
AS00-AS15, then press the <ENTER> button to
conrm.
4.) Adjust the speed of the chase as above using
SP15 (slowest) to SP00 (fastest) then
press the <ENTER>buttontoconrm.
5.)Tosetthextureasaslaveunit,select
SLAU, and hit <ENTER>. The unit will display a
ashing
SL.AU to indicate it is in slave mode.
Sound Active Mode:
1.) To use sound active mode, select
SouA, then press the <ENTER>buttontoconrm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.)Tosetthextureinmanualmode,selectPr--.
Toconrm,pressthe<ENTER> button.
2.) Now, select the program by using the <UP> and <DOWN> buttons to select
Pr00-
Pr15
.Toconrm,pressthe<ENTER> button.
Manual Color Adjustment:
Allows the user to adjust the color balance of the xture. These settings are global, they will effect all
modes.
1.) Use the <MENU> and <UP/DOWN> button to select
rL-- (Red Level), GL-- (Green
Level),
bL-- (Blue Level), AL-- (Amber Level), IL-- (White Level), or UL (UV Level), then
hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color between
x000-x255 (000=off), then hit <ENTER>toconrm.