User manual

Page 3
The Puck™ Fab5 Skywire Manual Rev. A Copyright (c) 2013 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
 •1xPuck™Fab5SkywireFlatLEDPARFixture
 •1xIECPowerCord
 •ThisLovelyUserManual
Getting It Out Of The Box
CongratulationsonpurchasingoneofthecoolestatLEDPARcansonthemarkettoday!
Based on our fantastic Puck™ design, THEN adding built-in Skywire™ wireless DMX, AND
ourproprietaryultralong-lifeintelion™Lithium-IonBatterySystemgiveyouaxturewith
TONSofoutput,exibilityandfantasticbattery-poweredruntime.
Now that you’ve got the Puck™ Fab5 Skywire (or hopefully, Puck Fab5 Skywire’s!), you
should carefully unpack the box and check the contents to ensure that all parts are pres
-
ent and in good condition. If anything looks as if it has been damaged in transit, notify the
shipper immediately and keep the packing material for inspection. Again, please save the
cartonandallpackingmaterials.Ifaxturemustbereturnedtothefactory,itisimpor
-
tantthatthexturebereturnedintheoriginalfactoryboxandpacking.
Powering Up!
Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch -Notallxtureshaveavoltageselectswitch,sopleaseverifythatthe
xtureyoureceiveissuitableforyourlocalpowersupply.Seethelabelonthextureor
refertothexture’sspecicationschartformoreinformation.Axture’slistedcurrent
ratingisitsaveragecurrentdrawundernormalconditions.Checkthextureordevice
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your xture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All xtures
must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email. We’ll be happy to
help, honest.
Blizzard Lighting
N16 W23390 Stoneridge Dr. Ste E
Waukesha, WI 53188 USA
www.blizzardlighting.com
414-395-8365
Email: [e-mail]
Disclaimer:Theinformationandspecicationscontainedinthisdocumentaresubjecttochange
without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that
may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document
or to create a new document to correct any errors or omissions at any time. You can download the
latest version of this document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 6/27/2013 J. Thomas 7/19/2013