User manual

Page 11
The Puck™ Fab5 Skywire Manual Rev. A Copyright (c) 2013 Blizzard Lighting, LLC
To Show the Fixture Running Hours:
1.) Select
FhrS from the control panel, then hit <ENTER>toconrm.
Menu Conventions
Addr =“ADDR,”DMXAddressSet/Adjust
ChNd =“CHMD,”ChannelModeAdjust
3 /5 /12 Ch = “3 Ch,” 3/5/12-Channel DMX Mode
SLNd =“SLMD,”SlaveModeAdjust
NASt = “MAST,” Master, set the unit to Master Mode.
SLAv =“SLAV”Slave,settheunittoSlaveMode.
StbY = “STBY,” Standby, unit is in Slave with no Master Fixture.
SHNd
Sou1 = “SOU1,” Sound Active 1, Scenes fade slowly when there is no audio.
Sou2 = “SOU2,” Sound Active 2, Independent slow fade of inner/outer LED’s.
Sou3 = “SOU3,” Sound Active 3, Scenes black out when there is no audio.
CoLo = “COLO,” Color Preset Mode.
Co XX = “CO 1 - CO31," Color Preset X.
AUto = “AUTO,” Auto (Color Snap) Mode.
FAdE = “FADE,” Color Fade Mode.
SP X = “SP 1 - SP 8,” Fade Speed 1-8 (Fast <-> Slow)
StCo = “STCO,” Color Strobe Mode.
Co XX = “CO 1 - CO31,” Color Preset X.
NANu =“MANU,”ManualColor/WhitePointAdjustmentMode.
REd =“RED,"AdjustRedIntensityfrom0to255.
GrEE =“GREE,”AdjustGreenIntensityfrom0to255.
bLuE =“BLUE,”AdjustBlueIntensityfrom0to255.
ANbE =“AMBE,”AdjustAmberIntensityfrom0to255.
UhIt =“WHIT,”AdjustWhiteIntensityfrom0to255.
FhrS = “FHRS,” Displays Fixture Running Hours
tESt = “TEST," Test Mode.