User manual

Page 12

4. OPERATING ADJUSTMENTS

The Control Panel

All the goodies and different modes possible with the Puck™ CSI Xtreme are accessed by

usingthecontrolpanelontherearofthexture.Thereare4controlbuttonsbelowthe

LED display which allow you to navigate through the various control panel menus.

<MENU>

Is used to navigate to the previous higher-level menu item.

<UP>

Scrolls through menu items and numbers in ascending order.

<DOWN>

Scrolls through menu items and numbers in descending order.

<ENTER>

Isusedtoselectandconrm/storethecurrentselection.

The Control Panel LED Display shows the menu items you select from the menu map

below.Whenamenufunctionisselected,thedisplaywillshowimmediatelytherst

available option for the selected menu function. To select a menu item, press <ENTER>.

Press the <MENU> button repeatedly until you reach the desired menu function. Use the

<UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER> button

to select the menu function currently displayed, or to enable a menu option. To return to

the previous option or menu without changing the value, press the

<MENU> button.

Control Panel Menu Structure

d --- d001 - d512 4 channel mode / choose DMX address

A --- A001 - A512 8 channel mode / choose DMX address

FF -- FF01 - FF99 Fade mode

r --- r001 - r255 1st LED group intensity

G --- G001 - G255 2st LED group intensity

b --- b001 - b255 3st LED group intensity

U --- U001 - U255 4th LED group intensity

dEoo -- Auto run mode

SoUd -- Sound active mode

SLAV -- Setsxturetoruninslavemode