Manualshelf

Operating instructions

ManualsBrandsBlizzard ManualsMedia ConverterPROKONTROL MH
11121314151617181920
Page 11
ProKontrol MH Manual Rev. A © 2013 Blizzard Lighting, LLC
3.5 System Functions
3.5.1 Resetting The System
WARNING: This will reset the controller to its factory defaults. ALL PROGRAMS AND
SETTINGS WILL BE ERASED!
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “02. Reset factory”.
3. Press <ENTER>toconrm.
4. Rotate the PAN wheel to select YES or NO.
5. Press <ENTER>toconrmor<ESC> to return to the main menu.
3.5.2 Delete All Fixture Patches
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “03. delete all Fixture patch”.
3. Press <ENTER>toconrm.
4. Rotate the PAN wheel to select YES or NO.
5. Press <ENTER>toconrmor<ESC> to return to the main menu.
3.5.3 Data Back-Up to USB Memory Stick
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “06. Data back up”.
3. Press <ENTER>toconrm.
4. Insert a USB memory stick to the USB port.
5. Rotate the PAN wheel to select YES or NO; press <ENTER>toconrm.
6. Pressanumberbuttontostoretheback-uple.Upto16lescanbe
backed up, respectively stored in number 1-16 buttons. If the LED indicator
ofanumberbuttonison,itmeansthereisback-upleinthisposition.
7. Press the <ESC> button to return to the main menu.
3.5.4 Load Data From USB Memory Stick
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “07. data load.”
3. Press <ENTER>toconrm.
4. Make sure your USB memory stick is in the USB port.
5. Rotate the PAN wheel to select YES or NO; press <ENTER>toconrm.
6. Pressanumberbuttontoloadtheback-uple.Upto16lescanbe
backed up, respectively stored in number 1-16 buttons. If the LED indicator
ofanumberbuttonison,itmeansthereisback-upleinthisposition.
7. Press the <ESC> button to return to the main menu.
3.5.5 Send Fixture Update File (RDM Fixtures Only)
ThroughtheDMXcable,sendxturermwarecode.
1. Press and hold <MENUS> for 2 seconds to enter Menu Mode.
2. Insert a USB memory stick to the USB port.
3. RotatethePANwheeltolocate“08.SendxtureUpdatele”.
4. Press <ENTER>toconrm.
5. RotatethePANwheeltolocatetheletosend.
6. Press <ENTER> to start sending.
7. RepeatStep4and5tosendanotherle.
8. Press the <ESC> button to exit.