User's Manual
Page 9
MiniSystem™ Manual - Rev. A © 2020 Blizzard Lighting, LLC
<Standby>
Puts the xture in standby mode. Press again to
return to normal working mode.
<Show 0>
This button shows all 3 built-in show programs in
random order (Shows 1-3).
<Show 1>
Press the "Show 1" button for the LED show.
<Show 2>
Press the "Show 2" button for the Strobe show.
<Show 3>
Press the "Show 3" button for the Laser show.
Remember to make sure that the laser safety key
switch is turned "ON".
<Show Fast>
Cycles through all of the show modes 0-3, fast. While running, the LED
indicator will ash fast.
<Show Slow>
Cycles through all of the show modes 0-3, slow. While running, the LED
indicator will ash slow.
<Show Sound>
Cycles through all of the show modes 0-3, controlled by sound. The LED
indicator will ash with beat.
Using the IR Remote Control
All the goodies and dierent modes possible with the minisystem™ can be
accessed by using the IR remote control.
The IR remote control is simple to use. It oers the same functionality of the
LED control panel, with the addition of quick access shortcut buttons.