User's Manual

Page 7

Fuse Replacement

1. With a at head screwdriver, remove the fuse holder from its housing.

2. Carefully remove the damaged fuse from the holder and replace with exact

same type of fuse (2A, 250V).

Before replacing a fuse, disconnect the power cord.

ALWAYS replace with the same type and rating of fuse.

3. SETUP

Mounting & Rigging

This xture may be mounted in any SAFE position provided there is enough

room for ventilation. The fan or vent pathway must never be obstructed.

IMPORTANT: Regardless of the rigging option

you choose for your xtures, always be sure to

secure your xture with a safety cable.

Mount the xture using a suitable "C" or "O"

type clamp. The clamps should be rated to

hold at least 10x the xture’s weight to ensure

structural stability.

Do not mount to surfaces of unknown

strength, and ensure properly rated rigging is

used when mounting xtures overhead.

Overhead mounting requires extensive

experience, which includes calculating working

load limits, knowledge of the installation

material being used, and periodic safety

inspections.

If you lack these qualications, do not attempt the installation yourself.

Improper installation can result in bodily injury.