User's Manual

Page 13
LB-Par™ RGBW User Manual Rev. B Copyright © 2017 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
ThedefaultmodeforthextureisDMX,sotherstmenuitemthatyoucaneditisthestarting
DMX address.
1.) Navigate the main menu until you reach Addr, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select a DMX channel from 001-512.
3.) Press the <ENTER>buttontoconrm.
Select the DMX Channel Mode:
1.) Navigate the main menu until you reach CHNL, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select either 1-CH (4-ch) or 2-CH (9-ch) mode.
3.) Press the <ENTER>buttontoconrm.
Slave Mode:SetslavexturestoDMXmode.Theywillautomaticallyfollowthemasterxture
(rstxtureintheDMXchain).
Built-in Programs & Speed Control
1.) Navigate the main menu until you reach Pr--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to choose any of its built-in programs from 1-13.
3.) Press the <ENTER>buttontoconrmyourchoice.
4.)Youcanthenadjustthespeedoftheprogram.
Speed:
a.) Navigate the main menu until you reach Sp--, and press <ENTER>.
b.) Then use the <UP/DOWN> buttons to select a speed setting from 0-99.
c.) Press the <ENTER>buttontoconrm.
Static Colors, Strobe, & Sound Active Mode
1.) Navigate the main menu until you reach CoLo, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select any of its static colors from 1-15 (15=off).
3.) Press the <ENTER>buttontoconrmyourchoice.
4.) You can then add a strobe effect if desired.
Strobe:
a.) Navigate the main menu until you reach Strb, and press <ENTER>.
b.) Then use the <UP/DOWN> buttons to select a strobe speed setting from 0-20
(fast <--> slow).
c.) Press the <ENTER>buttontoconrm.
Sound Active Mode: Navigate the main menu until you reach SOUN, and press <ENTER>.
Manual Color Mixing:
Mix your own custom colors using the R/G/B/W intensity level setting.
Red:
1.) Navigate the main menu until you reach rL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustred000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
Green:
1.) Navigate the main menu until you reach GL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustgreen000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
Blue:
1.) Navigate the main menu until you reach bL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustblue000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
White:
1.) Navigate the main menu until you reach UL---, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustwhite000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.