User Manual
Page 13
Stiletto™ Z19 Beam Moving Head - Rev. B (c) 2014 Blizzard Lighting, LLC
Control Panel Menu Structure
Main Function Sub Function Selection What It Does...
Address N/A 001 <-> 512 Sets the DMX address
Default Load Def? No Does not load Default system settings
Yes Loads Default system settings
View Hours Hours = Diplays hours used on fi xture
Version Version # Displays current version of software
DMXValue CH = 001 - 512
DMX = 000 - 255
Displays Channel and DMX settings established
Advanced Code Code = 000 Use 008 to access adjustment settings
Mic Sens Mic Sens = 075% Set sound sensitivity from 0%-100%
Adjust Pan Corrective manual adjustment for +/- 000-255
Tilt Corrective manual adjustment for +/- 000-255
Zoom Corrective manual adjustment for +/- 000-255
Red Corrective manual adjustment for +/- 000-255
Green Corrective manual adjustment for +/- 000-255
Blue Corrective manual adjustment for +/- 000-255
White Corrective manual adjustment for +/- 000-255
Option P&T Swap P&T Swap
= OFF
Swaps Pan & Tilt for programming purposes
P&T Swap
= ON
Swaps Pan & Tilt for programming purposes
Lost DMX Lost DMX
= Clear
Sets fi xture to clear last DMX program if DMX con-
nection is lost
Lost DMX
= Hold
Sets fi xture to hold last DMX program if DMX con-
nection is lost
Display DelayOff LCD display will turn off after 10 seconds
Always LCD display will stay on indefi nitely
Tilt Inv Tilt Inv
= OFF
Tilt will not be swapped
Tilt Inv
= On
Tilt will be swapped
Pan Inv Pan Inv
= On
Pan will not be swapped
Pan Inv
= Off
Pan will be swapped
Mode Mode =
DMX
Extended 23 Channel Mode
Standard 21 Channel Mode
Short 12 Channel Mode
Mode =
Slave
<ENTER> Puts fi xture into Slave Mode
Mode =
Music
Music
Alone
Sets fi xture in single music operation mode
Music
Master
Sets fi xture as master music operation to be used
with slave units
Mode =
Auto
Auto
Alone
Sets fi xture in single auto operation mode
Auto
Master
Sets fi xture as master auto operation to be used
with slave units