User Manual

Page 9

Control Panel Menu Structure

STAT A001 - A255 Cool white intensity (0-255)

b001 - b255 Warm white intensity (0-255)

ST00 - ST20 Strobe speed (0-20)

RUN dMX Master/DMX mode

SLAV Slave mode

dMX d001 - d255 Choose the DMX address (1-255)

TEMP CURR Displays the current temperature

TOP Sets the max allowed temperature

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) The default mode for the xture is DMX, which appears as dMX on the LED

readout. Push the <ENTER> button then the <UP> and <DOWN> buttons to

choose a channel between 1 and 512. Press <MENU> to return to the previ-

ous menu option.

Master/Slave Mode:

Allows you to link up to 32 units together without a controller.

1.) Use standard DMX cables to daisy chain your units together via the DMX con-

nector on the rear of the units.

2.) Choose a unit to function as the master. The master unit must be the rst

unit in the chain. Navigate the menu as follows:

Master : RUN <UP/DOWN/ENTER> dMX <ENTER> to conrm.

3.) Select the slave function by using the <UP>/<DOWN> keys to reach SLAV

in the RUN menu on the slave units. They will react in the same as the master.

Slave: RUN <UP/DOWN/ENTER> SLAV <ENTER> to conrm.