Instruction Manual

Page 18

Troubleshooting

Symptom Solution

Fixture Auto-

Shut Off

Checkthefaninthexture.Ifitisstoppedormoving

slower than normal, the unit may have shut itself off due to

highheat.Thisistoprotectthexturefromoverheating.

Clear the fan of obstructions, or return the unit for service.

No Light Output Checktoensurextureisoperatingundercorrectmode,IE

sound active/auto/DMX/Etc., if applicable. Contact service

for more information.

No Power Check fuse, AC cord and circuit for malfunction.

Blown Fuse Check AC cord and circuit for damage, verify that moving

parts are not restricted and that unit’s ventilation is not

obstructed

No Response to

Audio

Verifythatthextureisin“SoundActive”mode.

Adjust Audio Sensitivity, If Applicable.

Fixture Not

Responding /

Responding Er-

ratically

Make sure all connectors are seated properly and securely.

Use Only DMX Cables.

Install a Terminator.

Check all cables for defects.

Resetxture(s).

Intermittent

Lamp

Check lamp for properly installation.

Relamp, lamp may have reached end of life.

If your problem isn’t listed, or if problems persist,

please open a support ticket at www.blizzardlighting.com/tickets.

13 in (328 mm)

13.5 in (342 mm)

10 in (254 mm)

19.3 in (490 mm)

15.2 in (385 mm)

5.9 in (150 mm)4.6 in (108 mm)