User guide

Page 14

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.)ThedefaultmodeforthextureisDMX,whichappearsas d001 on

theLEDReadout.ToselectadifferentDMXaddress,hitthe<SETUP>

button and use the <UP/DOWN> buttons to select the correct address,

then hit <SETUP> again toconrm.

Auto, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user

selectable speeds.

1.)Tousethexturein7channelor26channelmode,usethe

<MENU> to scroll d001 and hit the <SETUP> button. Continue to

push the <SETUP> button and scroll to either 7-CH or 26CH.

2.)Tosetthextureinautomaticmode,usethe<MODE> to scroll to

AU7O, and hit <SETUP>. Then use the <UP/DOWN> buttons to select

n001 - n100 and hit <SETUP>. From here you can now adjust the

chase speed by selecting from SP01 (slowest) to SPFL (fastest).

3.)Tosetthexturetorunjustoneofits22built-inchasepatterns,use

the <MODE> to scroll to

Pr--, and hit <SETUP>. Then use the <UP/

DOWN> buttons to select Pr01 - Pr22 and hit <SETUP>. From here

you can now adjust the chase speed by selecting from SP01 (slowest)

to SPFL (fastest).

4.)Tousethextureaseitheraslaveunit,usethe<MODE> button to

scroll to

SLAu and then hit the <SETUP>button.Yourxturewillthen

be in slave mode.

Sound Active Mode:

1.)Tousethisxtureinsoundactivemode,scrolltoSU-- using the

<MODE> button, and hit <SETUP>. Then use the <UP/DOWN>

buttons to scroll through its 31 built-in sound active chase patterns.

Select

SU01 - SU31 and hit <SETUP>.

Manual Color Adjustment:

Allows the user to adjust the color balance of the xture. These settings are

global, they will effect all modes.

1.) Use the <MODE> button to navigate to

Colr and hit the

<SETUP> button.

2.) From here, you can navigate to r255, 9255, or b255 and use the

<UP/DOWN> buttons to adjust the global intensity of red, green, or

blue from 000 - 255.