Manual

Page 8

4. OPERATING ADJUSTMENTS

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) The default mode for the ﬁ xture is DMX, which appears as

Addr on the LED

Readout. Use the <ENTER> button then the <UP> and <DOWN> buttons to

choose a channel between

1 and 512. Press <ENTER> again to conﬁ rm.

Master/Slave Mode (Auto/Sound Active):

Allows you to link up to 32 units together without a controller.

1.) Use standard DMX cables to daisy chain your units together via the DMX con-

nector on the rear of the units. It may be necessary to use a terminator at the

last ﬁ xture. For more information about terminators, see page 8.

2.) Choose a unit to function as the Master. Select MAST. The master unit must

be the ﬁ rst unit. Finally, chain the units together using DMX cable.

Master

SLNd then NASt to conﬁ rm.

3.) Select slave function by using the <UP>/<DOWN> keys to reach SLAV in

the Master/Auto menu on the slave units, and they will react in the same as the

Master.

Slave

SLNd then SLAu to conﬁ rm.

4.) On the master ﬁ xture, use the <UP>/<DOWN> keys to reach AUTO, which

allows you to select the Master/Slave mode.

Sound active

SoUn then <ENTER> to conﬁ rm.

Auto mode

Auto then

Au 1 - Au15

1 = Red 2 = Green 3 = Blue

4 = White 5 = Red + Green 6 = Red + Blue

7 = Red + White 8 = Blue + Green 9 = Green + White

10 = Blue + White 11 = R + G + B 12 = G + B + W

13 = R + B + W 14 = R + G + W 15 = R + G + B + W

then <ENTER> to conﬁ rm.

Au16 = Red/Green/Blue/White Snap

Au17 = 15 Color Snap

Au18 = Strobe

Au19 = 15 Color Fade

AuSP = Rotation Speed (Slow <--> Fast)