Manual

SNOKONTROL Manual Rev B.
Page 2
Copyright © 2010-2013 Blizzard Lighting, LLC.
ALL RIGHTS RESERVED
TABLE OF CONTENTS
1. GETTING STARTED 3
1.1 What’s In The Box? 3
1.2 Getting It Out Of The Box 3
1.3 Powering Up! 3
1.4 Getting A Hold Of Us 3
IMPORTANT SAFETY INSTRUCTIONS 4
1.5 Instructions on Our Instructions 4
2. INTRODUCTION 5
2.1 Features 5
2.2 General Overview 5
2.3 Nifty, Spiffy Diagram (front) 5
2.4 Nifty, Spiffy Diagram (back) 6
2.5 Common Terms 7
3.OPERATING INSTRUCTIONS 8
3.1 Setup 8
3.1.1 Setting Up The System 8
3.1.2 Fixture Addressing 8
3.1.3 Pan & Tilt Channels 8
3.1.4 Resetting The System 9
3.1.5 Fixture Copy 9
3.1.6 Fade Time Assign 9
3.2 Manual Mode 9
3.3 Programming Mode 10
3.3.1 Entering Program Mode 10
3.3.2 Create A Scene 10
3.3.2.1 Review A Scene Or Chase 10
3.3.3 Running A Program 10
3.3.4 Check Program 11
3.3.5 Editing A Program 11
3.3.6 Copy A Program 11
3.4 Chase Programming 11
3.4.1 Create A Chase 11
3.4.2 Running A Chase 12
3.4.3 Checking A Chase 12
3.4.4 Edit A Chase (Copy A Bank Into A Chase) 12
3.4.5 Edit A Chase (Copy A Scene Into A Chase) 12
3.4.6 Edit A Chase (Insert A Scene Into A Chase) 12
3.4.7 Delete A Scene In A Chase 12
3.4.8 Delete A Scene In A Chase 13
3.4.9 Delete All Chase Programs 13
3.5 Scene Programming (Step Programming) 13
3.5.1 Insert A Scene 13
3.5.2 Copy A Scene 13
3.5.3 Delete A Scene 13
3.5.3 Delete All Scenes 14