User guide

Page 13
ProPAR 7.4 Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the xture will return to the correct mode after
approximately 10 seconds.
DMX Values In-Depth (7-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Master Dimmer (Slow <--> Fast)
2 000 <--> 255 Red Intensity (0% <--> 100%)
3 000 <--> 255 Green Intensity (0% <--> 100%)
4 000 <--> 255 Blue Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
6 000 <--> 255 Strobe (0-15 off, 16-255 strobe slow <-> fast)
7 000 <--> 255 Color Macros (slow <-> fast)
DMX Values In-Depth (4-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
4 000 <--> 255 White Intensity (0% <--> 100%)
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
Checkthefaninthexture.Ifitisstoppedormovingslower
than normal, the unit may have shut itself off due to high
heat.Thisistoprotectthexturefromoverheating.Clear
the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position, if
applicable.
No Light Output Checktoensurextureisoperatingundercorrectmode,IE
soundactive/auto/DMX/Etc.,ifapplicable.Contactservicefor
more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
No Response to
Audio
Verifythatthextureisin“SoundActive”mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
RespondingEr-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Resetxture(s).