User guide

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.)ThedefaultmodeforthextureisDMX,whichappearsas ADDR on

theLEDReadout.ToselectadifferentDMXaddress,hitthe<ENTER>

button and use the <UP/DOWN> buttons to select the correct address,

then hit <ENTER> toconrm.

Auto, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user

selectable speeds.

1.)Tousethexturein4channelor7channelmode,usethe<MENU>

and <UP/DOWN> buttons to select CHND and hit the <ENTER>

button. Then use the <UP/DOWN> buttons to select either 4CH or

7CH. Press the <ENTER>buttontoconrm.

2.)Tosetthextureinautomaticmode,usethe<MENU> and <UP/

DOWN> buttons to select SHND, hit <ENTER>. Then use the <UP/

DOWN> buttons to select COLO and hit <ENTER>. Then use the

<UP/DOWN> buttons to select AUTO , and press <ENTER>. You will

then be prompted to select the chase speed by selecting from SP 1

(slowest) to SP 8 (fastest). Then hit <ENTER> toconrm.

3.)Tousethextureaseitheramasterorslaveunit,usethe<MENU>

and <UP/DOWN> buttons to select SLND and then hit the <ENTER>

button. Then select either NAST for master or SLAU for slave. Press the

<ENTER>buttontoconrm.

4.) To adjust the fade speed navigate to FADE, hit <ENTER>, and

select SP 1 (slowest) to SP 8 (fastest). Press the <ENTER> button to

conrm.

Sound Active Mode:

1.)Tousethisxtureinsoundactivemode,selectSHND, then press the

<ENTER> button. Then select SOUN and hit enter.

Manual Color Adjustment:

Allows the user to adjust the color balance of the xture. These settings are

global, they will effect all modes.

1.) use the <MENU> and <UP/DOWN> buttons to select NANU and

hit the <ENTER> button.

2.) Then use the <UP/DOWN> buttons to scroll to either RED (red),

GREE (green), BLUE (blue), or Uh1t (White), and press <ENTER>.

Select the maximum level for each color between 0-255 (0=off), then

hit <ENTER>toconrm.