Instruction Manual
Page 13
ProPAR Seven.3 Manual Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the xture will return to the correct mode after
approximately 10 seconds.
DMX Values In-Depth (6-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Master Dimmer (Slow <--> Fast)
2 000 <--> 255 Red Intensity (0% <--> 100%)
3 000 <--> 255 Green Intensity (0% <--> 100%)
4 000 <--> 255 Blue Intensity (0% <--> 100%)
5 000 <--> 255 Built In Programs
6 000 <--> 255 Strobe (Slow <--> Fast)
DMX Values In-Depth (3-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
slower than normal, the unit may have shut itself off due to
Clear the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
No Light Output
for more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
No Response to
Audio
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.