Instruction Manual

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.



ADDR



<ENTER> button and use the <UP/DOWN> buttons to select the

correct address, then hit <ENTER> 

Auto, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user

selectable speeds.



<MENU> and <UP/DOWN> buttons to select CHND and hit the

<ENTER> button. Then use the <UP/DOWN> buttons to select

either3CH or 6CH. Press the <ENTER>

<MENU> and <UP/

DOWN> buttons to select SHND, hit <ENTER>. Then use the <UP/

DOWN> buttons to select COLO and hit <ENTER>. Then use the

<UP/DOWN> buttons to select AUTO , and press <ENTER>.



<MENU> and <UP/DOWN> buttons to select SLND and then hit the

<ENTER> button. Then select either NAST for master or SLAU for

slave. Press the <ENTER>

4.) To adjust the speed of the chase navigate to FADE, hit <ENTER>,

and select SP 1 (slowest) to SP 8 (fastest). Press the <ENTER>



Sound Acitve Mode:

SHND, then press

the <ENTER> button. Then select SOUN and hit enter.

Manual Color Adjustment:

Allows the user to adjust the color balance of the xture. These settings are

global, they will effect all modes.

1.) use the <MENU> and <UP/DOWN> buttons to select NANU and

hit the <ENTER> button.

2.) Then use the <UP/DOWN> buttons to scroll to either RED

(red), GREE (green), or BLUE (blue), and press <ENTER>. Select

the maximum level for each color between 0-255 (0=off), then hit

<ENTER>