Manual

Page 4
RokPix Manual Rev. A © 2013 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the de- cal or rear panel of the fi xture. • This product is intended for indoor use only. • To prevent risk of fi re or shock, do not expose fi xture to rain or moisture. • Make sure there are no fl ammable materials close to the unit while operating. • The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked. • ALWAYS disconnect from the power source before servicing or replacing fuse and be sure to replace with same fuse size and type. • ALWAYS secure fi xture using a safety chain. NEVER carry the fi xture by its cord. Use its carrying handles. • DO NOT operate at ambient temperatures higher than 104°F (40°C). • In the event of a serious operating problem, stop using the unit immediately. NEVER try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized tech- nical assistance center. Always use the same type spare parts. • NEVER connect the device to a dimmer pack. • Make sure the power cord is never crimped or damaged. • Never disconnect the power cord by pulling or tugging on the cord. • Avoid direct eye exposure to the light source while it is on. Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact Blizzard Lighting at sup- [e-mail].
Page 17
RokPix Manual Rev. A © 2013 Blizzard Lighting, LLC
Tech Specs!
Weight & Dimensions Length 9.22 inches (234 mm) Width 6.5 inches (165 mm) Height 8.98 inches (228 mm) Weight 9.04 lbs (4.1 kg) Power Operating Voltage 120VAC 60Hz Power Consumption 165W Max, 1.43A Light Source LED 19x 10W 4-in-1 LEDs 100,000 hours. Optical Beam Angle 25 degree optics standard
26 degree beam 30 degree fi eld
Luminous Intensity 1m 2m
Red 7,660 Lux 2,350 Lux
Green 7,850 Lux 2,360 Lux
Blue 8,200 Lux 2,500 Lux
White 9,230 Lux 2,500 Lux
All 23,000 Lux 2,740 Lux
Thermal Max. Operating Temp. 104 degrees F (40 degrees C) ambient Control Protocol USITT DMX-512 DMX Channels 8/16/72 Input 3-pin XLR Male Output 3-pin XLR Female Other Operating Modes Standalone, Master/Slave, Sound Active, Color Preset Coolness Factor Leventy Billion Percent Warranty 2-year limited warranty, does not cover malfunction caused
by damage to LED’s.
DISCLAIMER: The power connector fi tted to the fi xture and fi xture cord are designed for compatibility with
products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are not manufactured by, affi liated with or endorsed by Neutrik AG, Neutrik USA, or any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG.