Instruction Manual

Page 14
RokBox 5 RGBAW Manual Rev. A © 2013 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
Fixture Auto-Shut Off Checkthefaninthexture.Ifitisstoppedormovingslower
than normal, the unit may have shut itself off due to high
heat.Thisistoprotectthexturefromoverheating.Clear
the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position, if
applicable.
No Light Output Checktoensurextureisoperatingundercorrectmode,IE
soundactive/auto/DMX/Etc.,ifapplicable.
Chase Speed Too Fast/
Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that mov-
ing parts are not restricted and that unit’s ventilation is not
obstructed
Slow Movement Verify that 220V/110V switch is in the correct position, if appli-
cable. Also check that speed channels are set appropriately.
No Response to Audio Verifythatthextureisin“SoundActive”mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not Responding
/RespondingErraticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Resetxture(s).
Fixture Moving On Its
Own
Verifypropermodeofoperation.Isthexturein“Auto”
mode?
If your problem persists or isn’t listed contact [e-mail].
DMX Values In-Depth (5-Channel Mode)
Ch. Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
4 000 <--> 255 UV Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
DMX Values In-Depth (4-Channel HSV Mode)
Ch. Value What It Does (5 Ch.)
1 000 <--> 255 RGB Color Mixing
2 000 <--> 255 UV Intensity (0% <--> 100%)
3 000 <--> 255 White Intensity (0% <--> 100%)
4 000 <--> 255 Dimmer (0% <--> 100%)