Manual

Page 14

4. OPERATING ADJUSTMENTS

NOTE: After making any adjustment, hold the <MENU> button for approximately 3

seconds, otherwise the xture will return to the correct mode after approximately 10

seconds.

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.)ThedefaultmodeforthextureisDMX,whichappearsas

Addr on the LED

readout. Push the <ENTER> button then the <UP> and <DOWN> buttons to

choose a channel between 1 and 512. Press <ENTER>againtoconrm.

2.) To change between DMX channel modes, select

ChNd, then press

<ENTER>. Select either

3Ch, 5Ch or 12Ch, then press <ENTER> again

toconrm.

Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):

Allows you to link up to 32 units together without a controller.

1.) Use standard DMX cables to daisy chain your units together via the DMX connector on

the rear of the units.

2.)ChooseaunittofunctionastheMaster.Themasterunitmustbetherstunit.

Master:

SLNd then NASt toconrm.

3.)Thensetotherxturestoslaveruninslavemodebyusingthesameprocedure.

Slave:

SLNd then  toconrm.

NOTE: Fixtures in slave mode will display

. This is NORMAL. Return the xture to

master mode to use it as a standalone xture.

4.)Onthemasterxture,usethe<UP>/<DOWN> keys to reach

Shnd, which allows

you to select other functions:

Sound active

SoUn then S1 - S3, <ENTER>.

S1 = Sound Active + Strobe

S2 = Sound Active - Color Snap

S3 = Sound Active + Fade

Auto mode

Auto then SP -- <ENTER>, then choose speed 1-8.

Color preset

CoLo then Scroll through built-in colors, <ENTER>

Color fade

FAdE then SP -- <ENTER>, then choose speed 1-8.

NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.

2 min.

per color).