Owner manual

Page 14
Puck Couch Potato RGBAW Manual Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
NOTE: After making any adjustment, hold the <MENU> button for approximately 3
seconds, otherwise the xture will return to the correct mode after approximately 10
seconds.
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.)ThedefaultmodeforthextureisDMX,whichappearsas
Addr on the LED
readout. Push the <ENTER> button then the <UP> and <DOWN> buttons to
choose a channel between 1 and 512. Press <ENTER>againtoconrm.
2.) To change between DMX channel modes, select
ChNd, then press
<ENTER>. Select either
3Ch, 5Ch or 12Ch, then press <ENTER> again
toconrm.
Master/Slave Mode (Auto/Sound Active/Color Preset/Custom):
Allows you to link up to 32 units together without a controller.
1.) Use standard DMX cables to daisy chain your units together via the DMX connector on
the rear of the units.
2.)ChooseaunittofunctionastheMaster.Themasterunitmustbetherstunit.
Master:
SLNd then NASt toconrm.
3.)Thensetotherxturestoslaveruninslavemodebyusingthesameprocedure.
Slave:
SLNd then SLAV toconrm.
NOTE: Fixtures in slave mode will display “
STBY“ (Standby). This is NORMAL. Return
the xture to master mode to use it as a standalone xture.
4.)Onthemasterxture,usethe<UP>/<DOWN> keys to reach
Shnd, which allows
you to select other functions:
Sound active
SoUn then S1 - S3, <ENTER>.
S1 = Sound Active + Strobe
S2 = Sound Active - Color Snap
S3 = Sound Active + Fade
Auto mode
Auto then SP -- <ENTER>, then choose speed 1-8.
Color preset
CoLo then Scroll through built-in colors, <ENTER>
Color fade
FAdE then SP -- <ENTER>, then choose speed 1-8.
NOTE: Speed 1 = Fastest (Approx. 1.5 sec. per color), Speed 8 = Slowest (Approx.
2 min.
per color).