Instruction Manual

ManualsBrandsBlizzard Lighting ManualsLightingRGBA The Puck

Blizzard Lighting, LLC

www.blizzardlighting.com

Brookﬁ eld, WI USA

THE PUCK

™

RGBA

FLAT LED PAR CAN

Page 2

TABLE OF CONTENTS

The Puck™ RGBA LED PAR Can 1

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4

2. Meet The Puck™ RGBA LED PAR Can 5

Features 5

DMX Quick Reference (4 and 7-Channel Modes) 5

The Puck

™ RGBA Pin-up Picture 6

3. Setup 7

Fuse Replacement 7

Connecting A Bunch Of Puck™ RGBA LED PAR Cans 7

Data/DMX Cables 7

4. Operating Adjustments 8

DMX Mode & DMX Mode Selection 8

Master/Slave Mode 8

Sound Active Mode 8

Custom Color Display 8

Fixture running hour display 8

Troubleshooting 9

5. Appendix 10

Keeping The Puck™ RGBA LED PAR Can As Good As New 10

Returns (Gasp!) 10

Shipping Issues 10

Tech Specs 11

Summary of content (6 pages)

PAGE 1
THE PUCK FLAT LED PAR CAN ™ RGBA TABLE OF CONTENTS The Puck™ RGBA LED PAR Can 1 1. Getting Started 3 What’s In The Box? Getting It Out Of The Box Powering Up! Getting A Hold Of Us Safety Instructions (Don’t Stick Your Hand In The Toaster!) 2. Meet The Puck™ RGBA LED PAR Can 3 3 3 3 4 5 Features DMX Quick Reference (4 and 7-Channel Modes) The Puck™ RGBA Pin-up Picture 3. Setup 5 5 6 7 Fuse Replacement Connecting A Bunch Of Puck™ RGBA LED PAR Cans Data/DMX Cables 4.
PAGE 2
1. GETTING STARTED SAFETY INSTRUCTIONS What’s In The Box? • 1 x Puck™ RGBA Flat LED PAR Fixture • 1x IEC Power Cord • This Lovely User Manual Getting It Out Of The Box Congratulations on purchasing one way cool, way THIN LED PAR fixture! Now that you’ve got The Puck™ RGBA (or hopefully, Pucks!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
PAGE 3
2.
PAGE 4
3. SETUP 4. OPERATING ADJUSTMENTS NOTE: After making any adjustment, the fixture will return to the correct mode after approximately 5 seconds. DMX Mode Allows the unit to be controlled by any universal DMX controller. Addr 1.) The default mode for the fixture is DMX, which appears as on the LED Readout. Use the button then the and buttons to 1 and 512. Fuse Replacement choose a channel between With a flat head screwdriver, wedge the fuse holder out of its housing.
PAGE 5
. APPENDIX Troubleshooting Symptom Solution Keeping Your Puck™ RGBA As Good As New Fixture AutoShut Off Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating. Clear the fan of obstructions, or return the unit for service. Beam is Dim Check optical system and clean excess dust/grime. Also ensure that the 220V/110V switch is in the correct position, if applicable.
PAGE 6
Tech Specs! Weight & Dimensions Length 8.25 inches (210 mm) Width 2.5 inches (63.5 mm) Height 8.25 inches (210 mm) Weight 4.0 lbs (1.8 kg) Power Operating Voltage 90-230VAC, 50-60 Hertz Fuse 3A 250V Power Consumption 20W Light Source LED 144x 10mm Red/Green/Blue/Amber 100K hrs. Optical Beam Angle 21 degrees 32 degree field Luminous Intensity 3,000 Lux @ 1m Thermal Max. Operating Temp.