User Manual

Page 13
The Puck: Unplugged RGB Manual Rev. B Copyright (c) 2011-2012 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
Using The Battery System
The Puck: Unplugged™ features an easy-to-use Lithium-Ion internal
battery system which allows the user to the exibility to operate their
light xture without AC power for up to 20 hours.
The battery system is controlled by two rocker switches located on the
rear of the unit, as shown below:
As shown in the diagram, the top switch controls whether the battery
of the xture is supplying power for operation, charging, or off. The
bottom switch controls whether the unit is operating from AC power
from a traditional power source (IE a wall outlet).
To Operate The Fixture From The Battery:
1. Switch the top switch to position “I,” (BAT ON).
2. Switch the bottom switch to position “O, (OFF).
To Operate The Fixture From AC Power:
1. Switch the top switch to position “O,” (BAT OFF).
2. Switch the bottom switch to position “--,” (ON).
To Operate The Fixture From AC Power & Charge The Battery:
1. Switch the top switch to position “II,” (CHARGE).
2. Switch the bottom switch to position “--,” (ON).
To Charge The Battery With The Fixture Off:
1.) Switch the top switch to position “II,” (CHARGE).
2.) Switch the bottom switch to position “--,” (OFF).
IMPORTANT:
A full charge is obtained after
charging the xture for at
least 4 hours. The xture will
automatically stop charging
when the battery is in optimal
condition.
Display color/fade/chase, strobe,
wiCICLE operation, and environ-
mental factors including ambient
temperature will all impact battery
life. Depending on program, bat-
tery life may range from 3 to 20
hours.