Manual

Page 12
ToughPAR Quadra Manual Rev. B Copyright (c) 2012 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.)ThedefaultmodeforthextureisDMX,whichappearsas
d001 on the LED
Readout. To select a different DMX address, using the <MENU> button, select
Addr,then hit <ENTER>. Use the <UP/DOWN> buttons to select the correct
address, then hit <ENTER> toconrm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.)TosetthextureinFlash/Fademode,selectFLAS or FAdE
Toconrm,pressthe<ENTER> button.
2.)Now,selecttheashorfadespeedusing<MENU> button to reach
SP--,
then hit <ENTER>.
The display reads
SP15 (slowest) to SP00 (fastest), then press the <EN-
TER>buttontoconrm.
3.)Tousethextureinautomaticmode,select
ASC-, then press the <EN-
TER>buttontoconrm.
4.) Adjust the speed of the chase as above using
SP15 (slowest) to SP00
(fastest) then press the <ENTER>buttontoconrm.
5.)Tosetthextureasaslaveunit,select
SLAV, and hit <ENTER>. The unit
willdisplayaashing
SL-U to indicate it is in slave mode.
Sound Acitve Mode:
1.) To use sound active mode, select
SouA, then press the <ENTER> button
toconrm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.)Tosetthextureinmanualmode,selectPr--.
Toconrm,pressthe<ENTER> button.
2.) Now, select the program by using the <UP> and <DOWN> buttons to select
Pr00-Pr15.Toconrm,pressthe<ENTER> button.
Manual Color Adjustment:
Allows the user to adjust the color balance of the xture. These settings are global, they
will effect all modes.
1.) Use the <MENU> and <UP/DOWN> button to select
rL-- (Red Level),
GL-- (Green Level), bL-- (Blue Level) or UL-- (White Level), then hit
<ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color
between
x000-x255 (000=off), then hit <ENTER>toconrm.