Manual

Page 14
The Puck™ QFX Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
Fixture Auto-Shut
Off
Checkthefaninthexture.Ifitisstoppedormovingslowerthan
normal, the unit may have shut itself off due to high heat. This is to
protectthexturefromoverheating.Clearthefanofobstructions,
or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also ensure that
the 220V/110V switch is in the correct position, if applicable.
No Light Output Checktoensurextureisoperatingundercorrectmode,IEsound
active/auto/DMX/Etc., if applicable. Contact service for more infor-
mation.
Chase Speed Too
Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Slow Movement Verify that 220V/110V switch is in the correct position, if applicable.
Also check that speed channels are set appropriately.
No Response to
Audio
Verifythatthextureisin“SoundActive”mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Resetxture(s).
If your problem isn’t listed, or if problems persist,
please contact support: [e-mail].
DMX Values In-Depth (4-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
4 000 <--> 255 White Intensity (0% <--> 100%)
DMX Values In-Depth (3-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Dimmer (0% <--> 100%)
2
000 <--> 015
016 <--> 255
No Function
Strobe (Slow <--> Fast)
3
000 <--> 127
128 <--> 255
Built-in Programs
Speed Control
Static Colors
1.) Red 4.) White 7.) Red + White 10.) Blue + White 13.) R+B+W
2.) Green 5.) Red + Green 8.) Green + Blue 11.) R+G+B 14.) R+G+W
3.) Blue 6.) Red + Blue 9.) Green + White 12.) G+B+W 15.) R+G+B+W