User Manual

Page 3
The Puck Q12A / Q12W Manual Rev. B Copyright (c) 2011-12 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
•1xPuck™Q12FlatLEDPARFixture
•1xIECPowerCord
•ThisLovelyUserManual
Getting It Out Of The Box
Congratulations on being completely and utterly qtastic! Now that
you’ve got The Puck™ Q12 (or hopefully, Pucks!), you should carefully
unpack the box and check the contents to ensure that all parts are
present and in good condition. If anything looks as if it has been dam-
aged in transit, notify the shipper immediately and keep the packing
material for inspection. Again, please save the carton and all packing
materials.Ifaxturemustbereturnedtothefactory,itisimportant
thatthexturebereturnedintheoriginalfactoryboxandpacking.
Powering Up!
Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot
be run off a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel is used solely for a 0% to
100% switch.
AC Voltage Switch -Notallxtureshaveavoltageselectswitch,so
pleaseverifythatthextureyoureceiveissuitableforyourlocalpow-
ersupply.Seethelabelonthextureorrefertothexture’sspeci-
cationschartformoreinformation.Axture’slistedcurrentratingis
itsaveragecurrentdrawundernormalconditions.Checkthextureor
device carefully to make sure that if a voltage selection switch exists
that it is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit
matches the line voltage applied. Damage to your xture may
result if the line voltage applied does not match the voltage
indicated on the voltage selector switch. All xtures must be
connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email.
We’ll be happy to help, honest.
Blizzard Lighting
W220N1531JerichoCt.SuiteE,Waukesha,WI53186USA
support@blizzardlighting.com
www.blizzardlighting.com
1.866.493.6025