Owner manual

Page 14

6.) AR2.S - Architectural Mode #2 w/strobe (RGB, 8-Ch.)

Channel Value What It Does

1 000 <--> 255 Master Dimmer (0% <--> 100%)

2 000 <--> 255 Red Intensity (0% <--> 100%)

3 000 <--> 255 Green Intensity (0% <--> 100%)

4 000 <--> 255 Blue Intensity (0% <--> 100%)

5 000 <--> 255 White Intensity (0% <--> 100%)

6 000 <--> 255 Strobe speed (0 slowest, 255 fastest)

7 000 <--> 255 Zoom

8 000 <--> 255 Zoom speed (0 slowest, 255 fastest)

7.) HSV - Hue, Saturation, Value + Zoom Mode (5-Ch.)

Channel Value What It Does

1 000 <--> 255 Hue (0% <--> 100%)

2 000 <--> 255 Saturation (0% <--> 100%)

3 000 <--> 255 Brightness (0% <--> 100%)

4 000 <--> 255 Zoom

5 000 <--> 255 Zoom speed (0 slowest, 255 fastest)

ID Address Selection

IDAddressmodeallowsyoutoutilizeupto2,574xturesononly1DMX

universewhilemaintainingfullindividualcontrolovereachxture.Youcan

enable or disable ID address operation within the

SET menu. Control settings

are found in

STAG

mode, channel 11.

(see stage mode table on page 12)

• Id.01 - Id.66 -SetstheID#forthexture.

TEMP

Temperature Functions

Allows the user to set a temperature protection cutoff (default is 85 degrees

Celsius),anddisplaysthecurrentxturetemperature.

• CURR - Displays current temperature.

• TOP - Sets the max temperature before shutoff (0-150, 85=default).