User Manual

Page 15

EdIT

Edit Scenes & Programs

Create/edit up to 10 programs of up to 30 scenes for playback in standalone

mode, (from the “Auto” menu).

• PR01-PR10 - Program numbers 1-10

• SC01-SC30 - Scene numbers 1-30

To edit these programs and scenes:

 R000-R255 - Red Intensity (0% <--> 100%)

 G000-G255 - Green Intensity (0% <--> 100%)

 B000-B255 - Blue Intensity (0% <--> 100%)

 W000-W255 - White Intensity (0% <--> 100%)

 ST00-ST20 - Strobe Speed (Slow <--> Fast)

 T000-T255 - Scene Time (0% <--> 100%)

 F000-F255 - Fade Time (0% <--> 100%)

 M000-M255 - Zoom Position (Wide <--> Narrow)

SET

Advanced Setup Functions

The following options sets the xture’s advanced functions:

• UPLd

This allows you to upload you own user-created custom programs to other

Puck Pro Zoom™ xtures. You must set any xtures which will receive the

new programming to SLAVE mode, then on the master unit, enter the lock

password (UP/DOWN/UP/DOWN/ENTER), then press enter to conrm.

The xtures will display yellow while uploading is in progress, and will turn

green once uploading is complete.

• REST

Factory reset. Use this to reset the Puck Pro Zoom xture back to its

original factory installed settings.

• Id

Enables/disables ID address operation.