User Manual
Page 14
The Puck Pro Zoom Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
6.) AR2.S - Architectural Mode #2 w/strobe (RGB, 8-Ch.)
Channel Value What It Does
1 000 <--> 255 Master Dimmer (0% <--> 100%)
2 000 <--> 255 Red Intensity (0% <--> 100%)
3 000 <--> 255 Green Intensity (0% <--> 100%)
4 000 <--> 255 Blue Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
6 000 <--> 255 Strobe speed (0 slowest, 255 fastest)
7 000 <--> 255 Zoom
8 000 <--> 255 Zoom speed (0 slowest, 255 fastest)
7.) HSV - Hue, Saturation, Value + Zoom Mode (5-Ch.)
Channel Value What It Does
1 000 <--> 255 Hue (0% <--> 100%)
2 000 <--> 255 Saturation (0% <--> 100%)
3 000 <--> 255 Brightness (0% <--> 100%)
4 000 <--> 255 Zoom
5 000 <--> 255 Zoom speed (0 slowest, 255 fastest)
ID
ID Address Selection
ID Address mode allows you to utilize up to 2,574 xtures on only 1 DMX
universe while maintaining full individual control over each xture. You can
enable or disable ID address operation within the SET menu. Control settings
are found in
STAG
mode, channel 11.
(see stage mode table on page 12)
.
• Id.01 - Id.66 - Sets the ID# for the xture.
TEMP
Temperature Functions
Allows the user to set a temperature protection cutoff (default is 85 degrees
Celsius), and displays the current xture temperature.
• CURR - Displays current temperature.
• TOP - Sets the max temperature before shutoff (0-150, 85=default).