User guide

Page 3

1. GETTING STARTED

What’s In The Box?

 •1xPixelStorm™ProfessionalLEDFixture

 •ThisLovelyUserManual

Getting It Out Of The Box

CongratulationsonpurchasingoneofthecoolestLEDxtures

anywhere! Now that you’re the proud owner of a PixelStorm™ (or

hopefully,MORE!),youshouldcarefullyunpacktheboxandcheckthe

contents to ensure that all parts are present and in good condition. If

anything looks as if it has been damaged in transit, notify the shipper

immediately and keep the packing material for inspection. Again,

pleasesavethecartonandallpackingmaterials.Ifaxturemustbe

returnedtothefactory,itisimportantthatthexturebereturnedin

the original factory box and packing.

Powering Up!

Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot

be run off a rheostat (variable resistor) or dimmer circuit, even

if the rheostat or dimmer channel is used solely for a 0% to

100% switch.

AC Voltage Switch -Notallxtureshaveavoltageselectswitch,so

pleaseverifythatthextureyoureceiveissuitableforyourlocal

powersupply.Seethelabelonthextureorrefertothexture’s

specicationschartformoreinformation.Axture’slistedcurrent

rating is its average current draw under normal conditions. Check

thextureordevicecarefullytomakesurethatifavoltageselection

switch exists that it is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit

matches the line voltage applied. Damage to your xture may

result if the line voltage applied does not match the voltage

indicated on the voltage selector switch. All xtures must be

connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email.

We’ll be happy to help, honest.

Blizzard Lighting

W220N1531JerichoCt.SteE

Waukesha, WI 53186 USA

www.blizzardlighting.com

414-395-8365