Instruction Manual

Page 12
PixelStorm™ 240 Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
Setting the DMX Channel Mode:
TocontrolthePixelStorm™240inDMX,rstselectfromoneoftheDMXcontrolchannelmodes
(3/4/7/10/16/24, or 28 channel mode.)
1.) To select a DMX channel mode, press the <MENU> button, then use the <UP> or <DOWN> buttons
until the display reads
Chnd and press the <MENU> button.
2.) Then use the <UP> or <DOWN> buttons until the display reaches your desired channel mode.
3.) Press the <MENU>buttontoconrm
.
Setting the DMX Address:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads
Addr and
press the <MENU> button.
2.) Use the <UP> and <DOWN> buttons to set the appropriate DMX address from
d001 -d512.
3.) Press the <MENU>buttontoconrm
.
Built-in Programs:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads Pr-- , and
press the <MENU> button.
2.) Then use the <UP> and <DOWN> buttons to choose your desired program from
Pr00-Pr25, and
press the <MENU> button.
3.) To adjust the speed, use the <UP> or <DOWN> buttons until the display reads
SP-- and press the
<MENU> button.
4.) Then use the <UP> and <DOWN> buttons to set your desired speed from
SP00 to SP15.
5.) Press the <MENU>buttontoconrm
.
Flash and Fade Modes:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads FLAS or
FAdE, and press the <MENU>.
2.) Then use the <UP> and <DOWN> buttons to set your desired speed from FL00 to FL15, or FA00
to
FA15.
3.) Press the <MENU>buttontoconrm
.
Auto Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads ASC- and
press the <MENU> button. This will run
Pr08-Pr25 insequence.
2.) Then use the <UP> and <DOWN> buttons to choose your desired speed from AC00-AC15, and press
the <MENU> button.
Sound Active Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads SouA , and
press the <MENU> button.
2.) Use the sensitivity knob to adjust sound sensitivity.
Custom Color Adjustments:
1.) Press the <MENU> button until the display reads r255 (Red intensity, 0-255), or G255 (Green inten-
sity, 0-255), b255 (Blue intensity, 0-255)
2.)PleasenotethatthesesettingswilleffectthextureGLOBALLY,IEinanymode.
Slave Mode:
1.) Press the <MENU> button, then use the <UP> or <DOWN> buttons until the display reads SLAU and
press the <MENU> button.