User guide

Operating Instructions:

• DMX Output: Connect to the DMX receiving device.

• DMX Input: From the DMX transmitting device.

Connector pin designation should be as follows:

Pin 1: Signal common (shield)

Pin 2: Dimmer drive complement (data 1-)

Pin 3: Dimmer drive true (data 1+)

Pin 4: Option second data link complement (not used)

Pin 5: Option second data link complement (not used)

Do not exceed 32 units per one output channel and use a terminator on the last receiver.

Caution:

• This item must be earthed (grounded).

• Do not apply power source before completely nishing the installation.

• Always disconnect from mains before replacing the fuse.

• To reduce risk of re or electrical shock, do not expose to rain or moisture.

• Do not remove screws or covers. There are no user serviceable parts inside this unit.

Enjoy your product!

Our sincerest thanks for your purchase!

--The team @ Blizzard Lighting