User Manual

Page 14
Nova™ Moving Head User Manual Rev. A © Copyright 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set The DMX Starting Address
1.) ToassignaDMXstaringaddresstothexture,usethe<MENU> button to
scroll to Address SET, and press the <ENTER> button. Then use the <UP/
DOWN> buttons to display any value within the range of 001-512, then push the
<ENTER> button.
DMX Mode Selection
1.) After selecting the starting DMX address as described above, press the
<MENU> repeatedly to navigate to Run Mode, and press <ENTER>. Use the
<UP/DOWN> buttons to navigate to DMX512, and press the <ENTER> button.
Slave Mode
1.) ConnectallxturestogetherviaDMX.TherstxtureintheDMXchainwillbe
themasterxture,followedbytheslavextures.
2.)Foreveryslavexture,pressthe<MENU> repeatedly to navigate to Run
Mode, and press <ENTER>. Use the <UP/DOWN> buttons to navigate to
Slave, and press the <ENTER>button.Yourslavextureswillnowfollowthe
masterxture.
Auto, Stand-Alone, Sound Active Modes:
Allows single or M/S units to run factory installed programs at user selectable speeds.
Auto Mode
1.) Nova™ has two auto mode speeds to choose from, and both are enabled in
the same manner. Press the <MENU> repeatedly to navigate to Run Mode,
and press <ENTER>. Then simply use the <UP/DOWN> buttons to navigate to
either Fast or Slow, and press the <ENTER> button.
Built-in Programs
1.) Press the <MENU> repeatedly to navigate to Manual, and press <ENTER>.
Then use the <UP/DOWN> buttons to navigate to Light_S, and press the
<ENTER> button. You can now use the <UP/DOWN> buttons to highlight a
value from 000-255, and press <ENTER>. See page 16, channel 14 for exact
built-in program numerical values.
Sound Active Mode
1.) Press the <MENU> repeatedly to navigate to Run Mode, and press
<ENTER>. Then simply use the <UP/DOWN> buttons to navigate to Sound,
and press <ENTER>.