Manual

Page 3

1. GETTING STARTED

What’s In The Box?

 •1xNorthStarQuantum™Pro

 •AgroovyPowerConCord

 •ASweetSafetyCable&MountingBracket

 •OnereallyclassyDMXcable

 •ThisLovelyUserManual

Getting It Out Of The Box

Congratulations on purchasing the NorthStar Quantum™ Pro, the next

generation of LED moving head washes! Now that you’ve got your North

Star™ you should carefully unpack the box and check the contents to

ensure that all parts are present and in good condition. If anything looks

as if it has been damaged in transit, notify the shipper immediately and

keep the packing material for inspection. Again, please save the carton

andallpackingmaterials.Ifaxturemustbereturnedtothefactory,it

isimportantthatthexturebereturnedintheoriginalfactoryboxand

packing.

Powering Up!

Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot

be run off a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel is used solely for a 0% to 100%

switch.

AC Voltage Switch -Notallxtureshaveavoltageselectswitch,so

pleaseverifythatthextureyoureceiveissuitableforyourlocalpower

supply.Seethelabelonthextureorrefertothexture’sspecications

chartformoreinformation.Axture’slistedcurrentratingisitsaverage

currentdrawundernormalconditions.Checkthextureordevicecare

fully to make sure that if a voltage selection switch exists that it is set to

the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit match-

es the line voltage applied. Damage to your xture may result if

the line voltage applied does not match the voltage indicated on

the voltage selector switch. All xtures must be connected to cir

cuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email. We’ll

be happy to help, honest.

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

support@blizzardlighting.com | Phone: 866-493-6025