Manual
Page 11
NorthStar Quantum Pro Manual Rev. C Copyright (c) 2011-12 Blizzard Lighting, LLC
Control Panel Menu Structure
Main Function Sub Function Selection What It Does...
Function Mode
1
DMX Address
1
=000 <-> 255 Sets the DMX address
Set to Slave
2
N/A SetsthexturetoSLAVEmode
Auto Run
3
Program 1-8 Setsthexturetooperateautomatically,inone
of 8 preset programs.
=Alone / = Master SetsthextureaseitherastandaloneorMAS-
TERxturewhileinAutoRunmode.
Music Control
4
Program 1-8 Setsthexturetoreacttomusic,inoneof8
preset programs.
=Alone / = Master SetsthextureaseitherastandaloneorMAS-
TERxturewhileinMusicControlmode.
Reset
2
N/A = ON / = OFF Performs “power-up” reset and homes all step-
per motors
Reverse Pan
3
N/A = YES / = NO Reversesthexture’sPanmovement
Reverse Tilt
4
N/A = YES / = NO Reversesthexture’sTiltmovement
Mic Sensitivity
5
N/A = 0 - 100% Setsthesensitivityofthexture’sbuilt-in
microphone.
Special
6
Reset Default
1
= OFF / = ON Allowsthexturetobeconguredformanual
custom operation.
Calibration
2
Code
Allowscalibrationofthexture’sPANandTILT,
after entering the administrator code (088).
= 000 - 255
Pan Calibratesthexture’sPANmotor.Pleasenote
that this setting is factory set and does not need
to be altered under normal circumstances.
= 000 - 255
Tilt Calibratesthexture’sTILTmotor.Pleasenote
that this setting is factory set and does not need
to be altered under normal circumstances.
= 000 - 255
Temperature
3
N/A DisplaysthexturetemperatureattheLED
heat sink
Manual Control
4
Pan
Allowsmanualoperationofthexturebysetting
each DMX channel via the front panel
Tilt
Pan Fine
Tilt Fine
Move Speed
Strobe
Dimmer
Red
Green
Blue
White
VCW
Color Fading
R/G/B/W In
A/B/C/D/E/F