Manual

Page 16
SwitchBlade™ Micro User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC
DMX Values In-Depth (11-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Pan (0-540°)
2 000 <--> 255 Tilt (0-270°)
3 000 <--> 255 Fine Pan (fast <--> slow)
4 000 <--> 255 Fine Tilt (fast <--> slow)
5 000 <--> 255 Pan/Tilt Speed (slow <--> fast)
6 000 <--> 255 Dimmer (0% <--> 100%)
7 000 <--> 255 Strobe (slow <--> fast)
8 000 <--> 255 Red Intensity (0% <--> 100%)
9 000 <--> 255 Green Intensity (0% <--> 100%)
10 000 <--> 255 Blue Intensity (0% <--> 100%)
11 000 <--> 255 White Intensity (0% <--> 100%)
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
Check the fan in the xture. If it is stopped or moving
slower than normal, the unit may have shut itself off due to
high heat. This is to protect the xture from overheating.
Clear the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
No Light Out-
put
Check to ensure xture is operating under correct mode, IE
sound active/auto/DMX/Etc., if applicable. Contact service
for more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
No Response
to Audio
Verify that the xture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding
Erratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset xture(s).
If your problem isn’t listed, or if problems persist,
please contact support: [e-mail].