Manual

Page 10

USING THIS FIXTURE WITH THE wiCICLE® WIRELESS

DMX SYSTEM

In addition to the unbridled thrill you already

received the rst time you plugged in your

xture, you’ll be delighted to know that

This xture also works seamlessly with our

wiCICLE

Wireless DMX system, without additional power.

• ONLY xtures bearing this logo are certied for use with the wiCICLE

without external power.

• Unauthorized modication and/or using the wiCICLE

with un-

approved xtures may cause damage to the wiCICLE

or xture.

UNDER NO CIRCUMSTANCES IS BLIZZARD LIGHTING RESPONSI-

BLE FOR ANY DAMAGE FROM SUCH OPERATION.

• Fixtures bearing the above logo MUST only use cable and connectors

which separate chassis/case ground from cable shielding. Cabling with

the shield connected to the connector’s case/chassis may cause malfunc-

tion and damage to the wiCICLE

or xture.

• wiCICLE

transmitters have additional power requirements and

therefore cannot be powered directly from the xture. You will

need to utilize the supplied AC/DC adaptor to drive wiCICLE

transmitters in your system.

WE HAD THIS SPACE, SO WE FIGURED WE’D DRAW

YOU A PICTURE:

Antenna Housing & 1/2-wave

Antenna

Antenna ferrule & articulation

joint

Stainless Steel Housing

Recessed Selector Button

Status LED

3-Pin XLR Connector

(Male on transmitter, Female

on receiver model)