User Manual

Page 13
LB-Hex User Manual Rev. B © 2017 Blizzard Lighting, LLC
Speed Settings:
1.) Navigate the main menu until you reach Sp--, and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a speed setting from 0-99.
3.) Press the <ENTER>buttontoconrm.
Static Colors, Strobe, & Sound Active Mode
1.) Navigate the main menu until you reach CoLo, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select any of its static colors from 0-63.
3.) Press the <ENTER>buttontoconrmyourchoice.
4.) You can then add a strobe effect if desired.
Strobe:
a.) Navigate the main menu until you reach Strb, and press <ENTER>.
b.) Then use the <UP/DOWN> buttons to select a strobe speed setting from 0-20
(fast <--> slow).
c.) Press the <ENTER>buttontoconrm.
Sound Active: Navigate the main menu until you reach SOUN, and press <ENTER>.
Manual Color Mixing:
Mix your own custom colors using the R/G/B/A/W/UV intensity level setting.
Red:
1.) Navigate the main menu until you reach rL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustred000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
Green:
1.) Navigate the main menu until you reach GL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustgreen000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
Blue:
1.) Navigate the main menu until you reach bL--, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustblue000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
Amber:
1.) Navigate the main menu until you reach AL---, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustwhite000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
White:
1.) Navigate the main menu until you reach uL---, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustwhite000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
UV:
1.) Navigate the main menu until you reach UL---, and press <ENTER>.
2.) Use the <UP/DOWN>buttonstoadjustwhite000-255. (0% <--> 100%).
3.) Press the <ENTER>buttontoconrm.
LED Display On/Off:
You can set the LED menu display to either stay on continually, or turn off after 30 seconds of inactivity.
1.) Navigate the main menu until you reach LEd, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight either on or oFF.
3.) The On setting will keep the display on continually, and oFF will turn the display off after 30s.
4.) Press the <ENTER>buttontoconrmyourchoice.
Dimming Speed & Curve Settings:
You can manually set the xtures dimming curve of your choice:
1.) Navigate the main menu until you reach node, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight a speed from 0-4 (fast <--> slow).
3.) Press the <ENTER>buttontoconrm.