User Manual

Page 12

Control Panel Menu Structure

Addr

1-512 To choose the DMX address

CHNL

CH-1 6-channel DMX mode

CH-2 11-channel DMX mode

SP-- 0-99 Speedadjustments(0-99)

Pr-- 1-13 Built-in programs (1-13)

SOUN <ENTER> Sound active mode

CoLo 0-63 Built-in colors

Strb 0-20 Flash / strobe speed

rL-- 000 - 255 Red intensity (0% <--> 100%)

GL-- 000 - 255 Green intensity (0% <--> 100%)

bL--

000 - 255 Blue intensity (0% <--> 100%)

AL--

000 - 255 Amber intensity (0% <--> 100%)

uL-- 000 - 255 White intensity (0% <--> 100%)

UL-- 000 - 255 UV intensity (0% <--> 100%)

LEd on-off Display menu on/off

nodE 0-4 Dimming speed (fast <-->slow)

TEnP <ENTER> CheckLEDboardtemperature

UErn <ENTER> Software version

rSEt yes-no Restore factory settings

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the Starting DMX Address:

ThedefaultmodeforthextureisDMX,sotherstmenuitemthatyoucaneditisthestarting

DMX address.

1.) Navigate the main menu until you reach Addr, and press <ENTER>.

2.) Use the <UP/DOWN> buttons to select a DMX channel from 001-512.

3.) Press the <ENTER>buttontoconrm.

Select the DMX Channel Mode:

1.) Navigate the main menu until you reach CHNL, and press <ENTER>.

2.) Use the <UP/DOWN> buttons to select either 1-CH (6-ch) or 2-CH (11-ch) mode.

3.) Press the <ENTER>buttontoconrm.

Slave Mode:SetslavexturestoDMXmode.Theywillautomaticallyfollowthemasterxture

(rstxtureintheDMXchain).

Built-in Programs & Speed Control

1.) Navigate the main menu until you reach Pr--, and press <ENTER>.

2.) Use the <UP/DOWN> buttons to choose any of its built-in programs from 1-13.

3.) Press the <ENTER>buttontoconrmyourchoice.

4.)Youcanthenadjustthespeedoftheprogram.