User Manual

KLIMATEKONTROL Manual Rev A.

Page 13

In manual mode, the chases will move through their individually steps only

when triggered manually by the user.

1. Follow the steps indicated in Section 3.5.3.

2. Press the <RUN MODE> button until the LED indicator for MANUAL

mode is illuminated.

3. Using the <UP/DOWN> buttons, move through the steps in the se-

lected chase.

3.5.4 Playback Override

Allows the user to manually override the current output while in Color/Scene

Preset or Chase Playback Mode.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the <BLACKOUT> button is not lit.

2. Using the <FIXTURE SELECTOR> button(s), select the ﬁ xtures to

be controlled.

3. Adjust the color output using <FADER 1-4> as desired.

4. To return to Color/Scene Preset or Chase Playback Mode, press

<DEL/CLEAR>.

3.5.5 Strobe

Allows the user to strobe the current playback. Note: Strobe operates even

when the <BLACKOUT> button is active.

1. Press and hold the <STROBE> button. All currently selected/operat-

ing ﬁ xtures will strobe.

2. Using the <STROBE SPEED> fader, adjust the strobe speed, from 1

to 20 ﬂ ashes per second.

3. Release the <STROBE> button, and strobing will stop.

3.5.6 Blackout

Allows the user to stop all ﬁ xture output immediately (except while strobing

is active).

1. Press the <BLACKOUT> button. All output will cease. The LED

indicator will illuminate.

2. Press the <BLACKOUT> button again, and playback will resume.