Owner's manual
Page 3
Kaptivator™ Manual - Rev. A (c) 2013 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
•1xKaptivator™
•1xMountingbracketw/bolts
•ThisLovelyUserManual
Getting It Out Of The Box
Congratulations on purchasing one way cool, way original RGB 3D Laser!
Now that you’ve got your Kaptivator™ (or hopefully, Kaptivators!), you
should carefully unpack the box and check the contents to ensure that
all parts are present and in good condition. If anything looks as if it
has been damaged in transit, notify the shipper immediately and keep
the packing material for inspection. Again, please save the carton and
allpackingmaterials.Ifaxturemustbereturnedtothefactory,itis
importantthatthexturebereturnedintheoriginalfactoryboxand
packing.
Powering Up!
Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot
be run off a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel is used solely for a 0% to 100%
switch.
AC Voltage Switch -Notallxtureshaveavoltageselectswitch,so
pleaseverifythatthextureyoureceiveissuitableforyourlocalpower
supply.Seethelabelonthextureorrefertothexture’sspecica
-
tionschartformoreinformation.Axture’slistedcurrentratingisits
averagecurrentdrawundernormalconditions.Checkthextureorde
-
vice carefully to make sure that if a voltage selection switch exists that
it is set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit
matches the line voltage applied. Damage to your xture may
result if the line voltage applied does not match the voltage indi
-
cated on the voltage selector switch. All xtures must be con-
nected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email. We’ll
be happy to help, honest.
Blizzard Lighting
W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA
support@blizzardlighting.com
www.blizzardlighting.com
1.866.493.6025