User Manual

Page 3

1. GETTING STARTED

What’s In The Box?

 •1xICE60™Spot

 •AnEver-So-HandyPowerCord

 •ASweetSafetyCable&setofMountingBrackets

 •ThisLovelyUserManual

Getting It Out Of The Box

You’reascooollldasice...butnotwillingtosacriceyourlove...fora

greatLEDmovingheadxture!Nowthatyou’vegotyourICE60,you

should carefully unpack the box and check the contents to ensure that

all parts are present and in good condition. If anything looks as if it

has been damaged in transit, notify the shipper immediately and keep

the packing material for inspection. Again, please save the carton and

allpackingmaterials.Ifaxturemustbereturnedtothefactory,itis

importantthatthexturebereturnedintheoriginalfactoryboxand

packing.

Powering Up!

Allxturesmustbepowereddirectlyoffaswitchedcircuitandcannot

be run off a rheostat (variable resistor) or dimmer circuit, even

if the rheostat or dimmer channel is used solely for a 0% to

100% switch.

AC Voltage Switch -Notallxtureshaveavoltageselectswitch,so

pleaseverifythatthextureyoureceiveissuitableforyourlocalpow-

ersupply.Seethelabelonthextureorrefertothexture’sspeci-

cationschartformoreinformation.Axture’slistedcurrentratingis

itsaveragecurrentdrawundernormalconditions.Checkthextureor

device carefully to make sure that if a voltage selection switch exists

that it is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit

matches the line voltage applied. Damage to your xture may

result if the line voltage applied does not match the voltage

indicated on the voltage selector switch. All xtures must be

connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email.

We’ll be happy to help, honest.

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

support@blizzardlighting.com | Phone: 866-493-6025