Owner manual

Page 12
SnowBlind™ FX Manual - Rev. B Copyright (c) 2013 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the SnowBlind™ FX are accessed by
usingthecontrolpanelonthesideofthexture.Thereare4controlbuttonsbelowthe
LEDdisplaywhichallowyoutonavigatethroughthevariouscontrolpanelmenus.
<MODE>
Is used to navigate the various modes.
<SETUP>
Is used to enter into the selected mode setup.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
TheControlPanelLEDDisplayshowsthemenuitemslistedontheControl Panel Menu
Structure below. Pushing the <MODE> button repeatedly will scroll through the menu
settings. To edit one, push the <SETUP> button. Then use the <UP> and <DOWN>
buttonstoscrollthroughyourchoices(ifapplicable).Pushthemodebuttontoconrm.
Control Panel Menu Structure
d -- 001 - 255 DMX Starting Address
CON 000 - 255 BrightnessAdjustment(0%<-->100%)
Pro Pr.1 - Pr.4 Built-in programs 1-4 <SETUP>
SP.1 - SP.9 SpeedAdjustment(Slow<-->Fast)
AUT <SETUP> Sets the Fixture to Auto Mode
SP.1 - SP.9 SpeedAdjustment(Slow<-->Fast)
Sd1 <SETUP> Sound Active Mode 1
Sd 2 <SETUP> Sound Active Mode 2
SLA <SETUP> Sets the Fixture to Slave Mode
NOTE:Ifbuttonsarenotpressedwithin20seconds,theLEDdisplaywillshutoff.
Mode Setup doWNup